
Q-SERIES 22mm? Panel Mounting LED Indicator
Ordering Overview
STANDARD OPTIONS
The Q22 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.
Q
SERIES
Q
22
MOUNTING
HOLE
22 = ?22mm
F
BEZEL
STYLE
Metal
P = Prominent
F = Flush
Plastic
PP = Prominent
1
TERMINALS
1 = Solder
Lugs/Fastons
(2.8 x 0.8)
4 = Pins
5 = Wires
BP
BEZEL FINISH
Metal
C = Bright Chrome
B = Black Chrome
G = Satin Grey
Plastic
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(only up to 12VDC)
YY = Bi-colour
ZZ = Tri-colour
W
LED COLOUR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
28
VOLTAGE
05 = 5VDC*
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
E
SEALING
(Blank) = Unsealed
E = IP67
DL
OPTIONS
DL = Daisy Chain
LT = Lamp Test
FP = Flush
CP = Bright Chrome
28 = 28VDC
Example Q22FP1BPXXW28EDL
?22mm, flush bezel, solder lug
terminals, black plastic finish,
fixed light, white, 28volt DC LED,
IP67 Panel Seal, Daisy Chain
BP = Black
GP = Satin Grey
AU = Gold
SR = Super Bright
Red
SG = Super Bright
Green
SY = Super Bright
Yellow
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/
Green
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
*Supplied without
a resistor
? Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
? Standard wire length is 200mm, 22AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
? For LEDs with alternate voltages consult APEM
? Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
? Take care when soldering to the Faston terminals
? Pin and Wire options are epoxy sealed at the rear of the bezels
? The Tri-colour LED has red and green LEDs when both are connected yellow is produced
? Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-)
? Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode
? Tri-colour pins are centre (–) cathode, shortest (+) anode pin green, longest (+) anode pin red
? Maximum panel thickness: Prominent = 12mm, Flush = 10mm
? Plastic bezel material: ABS
? Daisy chaining option - has negative (Cathode) terminals linked (3 x Fastons), solder lugs only
? Lamp test facility option (4 x Faston), solder lugs only
? We recommend using Superbright LEDs for use at 220VAC
? For resistorless versions (05) please pay attention to the forward voltage
? For multi-voltage options please consult Apem
www.apem.com
21